How To Change Ink Cartridge On Epson Xp-440

Brand sure you have your replacement cartridges handy before you brainstorm. You must install new cartridges immediately afterwards removing the old ones.

Caution:

Get out your old cartridges in the printer until you lot are ready to replace them to forestall the print head nozzles from drying out. Do not open ink cartridge packages until yous are ready to install the ink. Cartridges are vacuum packed to maintain reliability.

Plough on your production.

Lift up the scanner unit.

Circumspection:

Do non move the print head by mitt; otherwise, yous may damage your product. Practise not affect the flat white cable inside the printer.

Press the

stop push button.

Squeeze the tab on the cartridge and lift the cartridge straight upwardly to remove it.

Note: Dispose of used cartridges advisedly. Practise non take the used cartridge apart or try to refill information technology.

Warning: If ink gets on your skin, wash it thoroughly with lather and water. If ink gets into your optics, flush them immediately with water. If ink gets into your mouth, spit it out and see a doctor correct away. Keep ink cartridges out of the reach of children.

Earlier opening the new cartridge parcel, milk shake it gently four or 5 times.

Circumspection:

Practice not shake the cartridges after opening the packages, or ink may leak.

Remove the cartridge from the packet.

Circumspection:

Exercise non impact the green chip or the small window on the cartridge. Install the new cartridge immediately after removing the old one; if y'all do not, the print head may dry out and be unable to print.

Remove the yellow tape from the side of the cartridge.

Circumspection:

Do not remove any other labels or seals, or ink volition leak.

Insert the new cartridge into the holder and button it down until it clicks into place.

Lower the scanner unit.

Press the

stop button. The impress head moves to its home position and the printer starts charging the ink. This takes well-nigh one.5 minutes. When the

ability light stops flashing and remains on, ink charging is finished.

Caution:

Never turn off the production while the ability light is flashing or you volition waste material ink.

Notation: If the ink light is on after the impress head moves to its home position or the power light is still flashing 3 minutes later on replacing a cartridge, an ink cartridge may non be installed properly. Press the finish push, then press the ink cartridge down until it clicks into place.

If you remove a low or expended ink cartridge, you cannot re-install and employ the cartridge.

Caution:

If you remove an ink cartridge for later utilize, protect the ink supply area from clay and grit and store it in the aforementioned environment every bit the printer. The valve in the ink supply port is designed to contain any excess ink, but do non touch the ink supply port or surrounding expanse. Ever store ink cartridges with the label facing up; do not store cartridges upside-down.

Source: https://files.support.epson.com/htmldocs/xp200_/xp200_ug/Source/Printers/Source/Ink_Functions/Tasks/XP200/removing_installing_cartridges_xp200.html

Posted by: steeleconswited1948.blogspot.com